A new multi-anvil type high-presure apparatus has been developed using sintered diamond anvils to generate pressures over 30 GPa and temperatures up to about 2000°C. A maximum sample volume of about 1 mm3 is available in this system. The pressure was confirmed by dissociation of forsterite into Mg-perovskite and periclase. The basic techniques and problems in utilizing sintered diamond in the MA8 type high-pressure apparatus are discussed with an emphasis on the future prospect of incorporating simultancous X-ray diffraction observation. 相似文献
Convective instability and overstability of a plane-parallel medium in the presence of a uniform vertical magnetic field is studied. We take into account both the effect of penetration of disturbances into sub-adiabatically stratified semi-infinite upper and lower layers, and the effect of thermal damping of disturbances introduced by the compressibility of the medium. If the degree of super-adiabaticity in temperature stratification in the middle layer is relatively large compared with that of sub-adiabaticity in the upper and lower layers, the range of physical conditions in which overstable convection occurs is very narrow. However, if it is not the case the range is rather wide. In the normal sunspot umbra, only disturbances with selected sizes in vertical dimension will be able to become overstable. The overstable convection might be a cause of some dynamical features (such as dots) in the sunspot umbra, but will not be the main contributor for transporting mechanical energy in the sunspot region. 相似文献
A theoretical light curve is constructed for the quiescent phase of the recurrent nova U Scorpii in order to resolve the existing distance discrepancy between the outbursts (d approximately 6 kpc) and the quiescences (d approximately 14 kpc). Our U Sco model consists of a very massive white dwarf (WD), an accretion disk (ACDK) with a flaring-up rim, and a lobe-filling, slightly evolved, main-sequence star (MS). The model properly includes an accretion luminosity of the WD, a viscous luminosity of the ACDK, and a reflection effect of the MS and the ACDK irradiated by the WD photosphere. The B light curve is well reproduced by a model of 1.37 M middle dot in circle WD + 1.5 M middle dot in circle MS (0.8-2.0 M middle dot in circle MS is acceptable) with an ACDK having a flaring-up rim and the inclination angle of the orbit i approximately 80&j0;. The calculated color is rather blue (B-V approximately 0.0) for a suggested mass accretion rate of 2.5x10-7 M middle dot in circle yr-1, thus indicating a large color excess of E(B-V) approximately 0.56 with the observational color of B-V=0.56 in quiescence. Such a large color excess corresponds to an absorption of AV approximately 1.8 and AB approximately 2.3, which reduces the distance to 6-8 kpc. This is in good agreement with the distance estimation of 4-6 kpc for the latest outburst. Such a large intrinsic absorption is very consistent with the recently detected period change of U Sco, which is indicating a mass outflow of approximately 3x10-7 M middle dot in circle yr-1 through the outer Lagrangian points in quiescence. 相似文献
We have constructed a large, mosaic CCD camera called MOA-cam2 which has 4096 × 6144-pixelsto search for gravitational microlensing events. MOA-cam2 has three4096 × 2048-pixel SITe CCD chips, which have a very high quantum efficiency (nearly 80% in the wave region 500 to 800 nm),and three buttable sides. We have placed the threechips side by side with 100 m dead space. MOA-cam2 has been installed on the 61 cm Boller and Chivens telescope of the MOA collaboration at the Mt. John University Observatory (MJUO) in NewZealand since July 1998. The field coverage is 0.92° × 1.38° per exposure. The technical details of MOA-cam2 and the first images obtained with the Boller and Chivens telescope are presented. MOA-cam2 introduces a second phase of research on gravitational microlensing by the MOA collaboration. 相似文献
Freezing was used in the jointing section of two shields (diameter 3.14 m) which ran across at right angles and at 25-m depth under the crossing of main roads for the construction of a 2.4-m diameter sewer tunnel. The object of freezing was to create a frozen barrier to prevent the inflow of water and fine sand into the area to be excavated.
Thirty-five freeze pipes (length about 7 m) were placed from one shield conically in the direction of the flank of another shield with freeze pipes attached to its inside wall. The cooling unit was placed on unoccupied land at about 60 m distant from the jointing section and the freeze pipes were connected with the cooling unit by supply and return pipelines.
The cooling unit had a cooling capacity of 79,000 kcal/h at an evaporation temperature of −27°C and a condensation temperature of +40°C. Freezing was continued for 180 days and the CaCl2 brine temperature was −25 to −30°C. These works were accomplished without the sinking of shaft and the use of injection, in complete safety with no traffic restriction on the road surface. 相似文献
Moldavites are tektites genetically related to the Ries impact structure, located in Central Europe, but the source materials and the processes related to the chemical fractionation of moldavites are not fully constrained. To further understand moldavite genesis, the Cu and Zn abundances and isotope compositions were measured in a suite of tektites from four different substrewn fields (South Bohemia, Moravia, Cheb Basin, Lusatia) and chemically diverse sediments from the surroundings of the Ries impact structure. Moldavites are slightly depleted in Zn (~10–20%) and distinctly depleted in Cu (>90%) relative to supposed sedimentary precursors. Moreover, the moldavites show a wide range in δ66Zn values between 1.7 and 3.7‰ (relative to JMC 3‐0749 Lyon) and δ65Cu values between 1.6 and 12.5‰ (relative to NIST SRM 976) and are thus enriched in heavy isotopes relative to their possible parent sedimentary sources (δ66Zn = ?0.07 to +0.64‰; δ65Cu = ?0.4 to +0.7‰). In particular, the Cheb Basin moldavites show some of the highest δ65Cu values (up to 12.5‰) ever observed in natural samples. The relative magnitude of isotope fractionation for Cu and Zn seen here is opposite to oxygen‐poor environments such as the Moon where Zn is significantly more isotopically fractionated than Cu. One possibility is that monovalent Cu diffuses faster than divalent Zn in the reduced melt and diffusion will not affect the extent of Zn isotope fractionation. These observations imply that the capability of forming a redox environment may aid in volatilizing some elements, accompanied by isotope fractionation, during the impact process. The greater extent of elemental depletion, coupled with isotope fractionation of more refractory Cu relative to Zn, may also hinge on the presence of carbonyl species of transition metals and electromagnetic charge, which could exist in the impact‐induced high‐velocity jet of vapor and melts. 相似文献
The mechanism of locomotion of aquatic animals can provide us with new insight into the maneuverability and stabilization of underwater robots. This paper focuses on biomimesis in the maneuvering performance of aquatic animals to develop a new device for maneuvering underwater robots. In this paper, guidance and control in the horizontal plane of a fish robot equipped with a pair of two-motor-driven mechanical pectoral fins on both sides of the robot in water currents is presented. The fish robot demonstrates high performance in terms of maneuverability in such activities as lateral swimming. The use of fuzzy control enables the fish robot to perform rendezvous and docking with an underwater post in water currents 相似文献
Besshi-type Cu deposits are strata-bound volcanogenic massive sulfide deposits usually associated with mafic volcanic rocks or their metamorphic equivalents. Although there are numerous Besshi-type deposits in the Sanbagawa metamorphic belt, Japan, their tectonic settings and depositional environments remain controversial because of a lack of depositional age constraints. We report Re-Os data for the Iimori deposit, one of the largest Besshi-type deposits in western Kii Peninsula, in order to examine the robustness of the Re-Os isotope system for dating sulfide minerals in the high-P/T metamorphic belt and to elucidate the primary depositional environment of the Iimori sulfide ores. An 11-point Re-Os isochron plot yields an age of 156.8 ± 3.6 Ma. As this Re-Os isochron age is significantly older than the timing of the Sanbagawa peak metamorphism (110-120 or ∼90 Ma) and a well-defined isochron was obtained, the Re-Os age determined here is most likely the primary depositional age. Despite high-grade metamorphism at up to 520 ± 25 °C and 8-9.5 kbar, the Re-Os isotope system of the Iimori sulfides was not disturbed. Hence, we consider that the whole-rock Re-Os closure temperature for the Iimori sulfide ores was probably higher than 500 °C. As the accretion age of the Sanbagawa metamorphic belt is considered to be 120-130 or 65-90 Ma on the basis of radiolarian and radiometric ages, we estimated the time from the Iimori sulfide deposition on the paleo-seafloor to its accretion at the convergent plate boundary to be greater than 25 Myr. Consequently, the depositional environment of the Iimori sulfide ores was not in the marginal sea, but was truly pelagic. 相似文献